Re‐roofing in Ventura County requires a permit from Building and Safety and involves two inspections.
The first is a roof nailing inspection, where an inspector will inspect the nailing pattern of the roof deck
and a final inspection, to ensure the job was completed. The County has no minimum requirements on
the type of product to be installed and follows California’s 2007 Uniform Building Code. For additional
information you may contact Building & Safety at 805‐582‐8064 (East County) or (West County) at 805‐
654‐2771 or online at
Listed below is a breakdown of the minimum roofing requirements based upon the most common existing roof coverings.
They include Wood Shake, Composition or Asphalt Single, Concrete Tile, and low slow of flat roofing.
| Categories |
Wood Shake |
Asphalt Single |
Tile |
Low slope |
| No. of layers |
Max is 1. No addl. layers allowed |
Max layers is 3 |
Max is 1. No addl. layers allowed |
Added layers may require Eng. Report |
| Plywood |
1/2" OSB or CDX Plywood |
Usually not needed. |
Usually not needed. |
Usually not needed. |
| Minimum Felt Underlayment* |
15# ASTM. 30#(+) is recommended. |
15# ASTM. 30#(+) is recommended. |
2 layers of 40#(+) is recommended. |
Not applicable |
| Minimum Fire Rating |
Class A minimum |
Class A minimum |
Class A minimum |
Class B minimum. Recommend Class A. |
| Color Restrictions |
** No Restrictions ** |
| Maximum Weight |
** 6 lbs per square foot. Over 6 bls requires Engineers Report ** |
| * Roofs with a slope of less than 4:12 require a minimum of 2 layers of a 15 lb. ASTM felt underlayment. |