Roofing in Agoura Hills

Back to city list

Re‐roofing in Agoura Hills requires a permit from Building and Safety and involves two inspections. The first is a roof nailing inspection, where an inspector will inspect the nailing pattern of the roof deck and a final inspection, to ensure the job was completed. The City has no minimum requirements on the type of product to be installed and follows California’s 2007 Uniform Building Code. However, if you are part of a Homeowners Association there may be restrictions on the particular roofing product or color you install. For additional information you may contact Building & Safety at 818‐517‐6270 or online at http://ci.agoura-hills.ca.us.

Agoura Hills Roofing/Repair Requirements
Listed below is a breakdown of the minimum roofing requirements based upon the most common existing roof coverings. They include Wood Shake, Composition or Asphalt Single, Concrete Tile, and low slow of flat roofing.

Categories Wood Shake Asphalt Single Tile Low slope
No. of layers Max is 1. No addl. layers allowed Max layers is 3 Max is 1. No addl. layers allowed Added layers may require Eng. Report
Plywood 1/2" OSB or CDX Plywood Usually not needed. Usually not needed. Usually not needed.
Minimum Felt Underlayment* 15# ASTM. 30#(+) is recommended. 15# ASTM. 30#(+) is recommended. 2 layers of 40#(+) is recommended. Not applicable
Minimum Fire Rating Class A minimum Class A minimum Class A minimum Class B minimum. Recommend Class A
Color Restrictions ** No Restrictions **
Maximum Weight ** 6 lbs per square foot. Over 6 bls requires Engineers Report **
* Roofs with a slope of less than 4:12 require a minimum of 2 layers of a 15 lb. ASTM felt underlayment.


Agoura Hills Roofer should include the following:
  • Verify Contractor is licensed with Contractors State License Board at http://www.cslb.ca.gov
  • By law contractors must provide the following notices:
  • The Contract must include an Estimate Start and Complete Date
  • The Contract should include a specific scope of work on what is included and what is not.
  • The Contract should include a schedule of payments and deposits cannont exceed 10% or $1,000
  • Workmanship (Labor) and Material Warranty Information. Wind Warranty Information should also be noted.
  • The Contract should also list the business address and not a P.O. Box.
  • Local References
  • Verify a contractor's standing with the Better Business Bureau at http://www.santabarbara.bbb.org

Download a printable PDF
Agoura Hills - 79 KB PDF